Главная » Статьи » F.A.Q.

Matrix Freedom Manager [FAQ in English]

Matrix Freedom Manager - software from Matrix Team - Developer of the Matrix Freedom PCB, which is installed in the XBOX 360 drive instead of the original. Detailed instructions for installing the PCB here. Before installing the PCB you need to read the key from your XBOX 360 drive as described here. After installing the PCB, do not assemble the console, you need to flash it through the SATA-interface using the method described here. 9504 version of the board has not locked, so easily flashed to any firmware, in my case, to drive 0225. Do this you need only once, you can then assemble the console. To roll back / update the firmware in the future, we will use the programmer, in the set of Matrix Freedom PCB, which is mounted on the back of the XBOX 360 and the program Matrix Freedom Manager, download. First, install the driver for the programmer, download.

The fw folder is located in the folder with Matrix Freedom Manager besides the executable.

By default, there are original and custom firmware for all models of drives.

We have RUTHLESSLY REMOVES them, or moved to another folder if you want. Why? Because they have no information about the drive key, for the flashing they are not suitable, only confusion. Firmware for the work we have prepared ourselves.

Preparing firmware files.

Run JungleFlasher. Go to the Firmware Tool 32 tab, click the button Open Source Firmware.

Select your Dummy.bin file, obtained when reading from the drive and load it as a source.

JungleFlasher offer automatically download the latest custom firmware for your drive, agree.

The file is loaded and it carries information about your key, check the numbers for the selected fields must be identical.

Now we need to save the file of custom firmware to a folder fw, located in the folder with Matrix Freedom Manager.

WARNING! The file name must be exactly the same: LTPlus-XXXX-v3.0, where XXXX - model of your drive. In my case LTPlus-0225-v3.0.

If you enter a wrong, the program will not see the file. To avoid mistakes, it is better to copy and paste the name.

Click the button Save To File and save the file to a folder fw, located in the folder with Matrix Freedom Manager.

File with the custom firmware is ready.

Then click the button Open Target Firmware and load the original firmware for your drive from a folder Stock Firmware, located in the folder with JungleFlasher.

Click the button Spoof Source To Target, check the numbers for the selected fields must be identical.

Now we need to save the file of original firmware to a folder fw, located in the folder with Matrix Freedom Manager.

WARNING! The file name must be exactly the same: Orig-XXXX, where XXXX - model of your drive. In my case, Orig-0225.

If you enter a wrong, the program will not see the file. To avoid mistakes, it is better to copy and paste the name.
 

Click the button Save To File and save the file to a folder fw, located in the folder with Matrix Freedom Manager.

File with the original firmware is ready. All the needed files are in the folder fw, located in the folder with Matrix Freedom Manager.

Everything is ready, JungleFlasher can be closed.

Rolling back to the original firmware.

We connect the programmer to the back of the XBOX 360 to your computer via USB, turn on the XBOX 360. Video cable must be connected. Run Matrix Freedom Manager. It connects to the drive PCB and displays information about the firmware.

Click the button RESTORE ORIGINAL FW.

The program will automatically unlock the drive, write firmware check and block the drive. All transactions take 1-2 minutes.

Turn off the XBOX 360, disconnect it from the computer. We have an XBOX 360 with the original firmware. Let's check it out.

Original disks run.

Backups will not start.

Firmware upgrade.

We connect the programmer to the back of the XBOX 360 to your computer via USB, turn on the XBOX 360. Video cable must be connected. Run Matrix Freedom Manager. It connects to the drive PCB and displays information about the firmware.

Click the button WRITE IXTREME FW.

The program will automatically unlock the drive, write firmware check and block the drive. All transactions take 1-2 minutes.

Turn off the XBOX 360, disconnect it from the computer. We have an XBOX 360 with firmware LT 3.0 +. Let's check it out.


Original disks run.

Backups also started.


Muromes, especially for www.vg-village.ru

Категория: F.A.Q. | Добавил: Muromes (19.09.2012) | Автор: Muromes W
Просмотров: 4568 | Теги: FAQ, jungleflasher, Slim, matrix, firmware, rollback, 360, tutorial, XBOX, fashing | Рейтинг: 5.0/1
Всего комментариев: 0
Добавлять комментарии могут только зарегистрированные пользователи.
[ Регистрация | Вход ]
ФОРМА ВХОДА
Вы очень поможете развитию консольного движения если зарегистрируйтесь! Регистрация занимает 2 минуты
Навигация
Категории раздела
F.A.Q. [15]
Интернет-магазины [2]
Интересности [15]
Обзоры [1]
Новости TEAM XECUTER [14]
Раздел про TEAM XECUTER, которая с 2002 занимается разработкой устройств для моддинга XBOX360 и тесно сотрудничает с TEAM JUNGLE.
Новости The Matrix Team [2]
Xbox One [1]
Раздел про новую приставку от Micosoft
Читы/Солюшены/Секреты игр [0]
Мини-чат
Обзоры участников
Новости
Новости
Наш опрос
Как вы попали на наш сайт?
Всего ответов: 86
Обмен ссылками
Статистика


Все посетители за сегодня

Пожертвовать